Search public documentation:
This tutorial will show, by example, the process of creating a basic Procedural Building.
- A window or wall mesh that can be repeated
- A corner mesh that matches the height of the window or wall mesh
- A few storefront meshes
- A top trim mesh that can be repeated
- A corner mesh that matches the height of the trim mesh
ProcBuilding Ruleset are edited in Facade. When you open the Ruleset you created it will look like this: First off, we will need to create a Top/Bottom node. Right-click in Facade and select it from the list. This node allows us to define the top, bottom, and middle sections of the building. Next we will need to add a Corner node. Right-click and select it from the list. Hook it up to the Mid attachment of the Top/Bottom node. This will allow us to define an outside corner mesh, inside corner mesh, and main meshes. We can now add our window or wall mesh. Create a Mesh node by selecting the Static Mesh you want in the Content Browser and select Mesh from the right-click menu in Facade. Alternately you can hold the 'M' key and left-click in Facade to create the node. In the Mesh node Properties, you will need to define the X Z dimensions (DimX and DimZ). For this example we are using a window mesh that is 512 x 512. This is what our building looks like so far: You will notice that the mesh gets stretched along the longer side of our ProcBuilding Volume. To fix this, we need to have the mesh repeat along the x axis. Add a Reapeat node from the right-click menu and hook it up between the Corner node and the Mesh node. Change the repeat axis to EPBAxis_X in the node properties. Make sure to set the repeat size to the DimX of your mesh. The result: Now we need to define the corner meshes. Currently there is an empty placeholder space at each corner of the ProcBuilding Volume. Create a new Mesh node using your corner Static Mesh and hook it up to the 90 degree attachment slot. Make sure to set the dimensions of the mesh in the properties of the Mesh node and also the size of the corner. For this example we used '1' for the corner size and for the DimX on the Mesh node. You might need to play with these values in order to get your mesh to fit correctly. It mostly depends on where the pivot of the corner mesh is located. The result: At this point we have one complete floor of the building. We can edit the width of the ProcBuilding Volume and the meshes will adjust correctly to fit the size of the volume. If you try and edit the height of the volume you will notice that the meshes begin to stretch. To fix this, we need to repeat each floor along the Z axis. To do this, add a Repeat node before the Corner node and set repeat axis to EPBAxis_Z. Set the repeat size to 512. The result:
The top trim is created using the same rule setup that we did for the row of windows, just hooking it up to the Top attachment on the Top/Bottom node. Also the Top hieght needs to be defined in the properties of the Top/Bottom node. In this example, our top trim is 129 units tall. We set the ExtractTopZ to 129. The result:
The ground floor is setup the same way as the top trim. Except you use the height of you storefront meshes for your ExtractBottomZ on the Top/Bottom node. The result: The way this is currently setup, the ground floor consists of one repeating storefront Static Mesh. To add variety, add another mesh slot on the Mesh node for the storefront. Add a different Static Mesh in the new slot. Now set the chance that each mesh has of filling the slot. In this example we used .5 for each mesh. The result: This should provide a good basis to get you started creating Procedural Buildings in UnrealEngine3. Refer to the Procedural Buildings page for further documentation.